| |
How to install a dishwasher
By Jakob Jelling
The first thing that you'll need to do when you start installing a dishwasher is to make sure that the place you are going to put the dishwasher is free and ready to be used. If you have to uninstall a dishwasher, you will need to make sure that it is unplugged before you go any further. After that, you should disconnect the water and make sure that it will not leak. Then, take the old dishwasher out.
Before you install anything, you should make sure to measure it properly. This means that you'll need to find out whether or not the old wiring or pipes are in the right places. You can do this by measuring where the water needs to go into the dishwasher. If the pipes need to be moved, you can either bend them into the right position or you can cut in and install new pipe.
When you are putting a new dishwasher into your kitchen, you should make sure that you are careful to put the dishwasher is level. You should also make sure that the top and sides of the dishwasher are going to be installed even with the rest of your kitchen countertop. That way, there will not be any uneven gaps when you are finished putting it in.
If you're leveling the dishwasher before you install it, you should make sure that you don't rely too much on the leveling legs. If you need to lift part of the dishwasher higher than the extent of those legs, then you may have installed it incorrectly. Remeasure the space first, and if you still need to lift more of the dishwasher up, then you can use a block of wood to do so.
Make sure that you're careful not to drop any of the screws that you'll be using to install your dishwasher into the interior of the dishwasher itself. If you're not careful, then you might end up getting small pieces stuck in the drain.
After you've put the dishwasher in place, you are ready to hook things up. Hook the drain up first, then the water supply. The last thing that you should connect is the electrical power.
About the Author
Please visit http://www.dwank.com and learn more about home design and interior decorating.
Article Source: http://www.simplysearch4it.com/article/46964.html
| If you wish to add the above article to your website or newsletters then please include the "Article Source: http://www.simplysearch4it.com/article/46964.html" as shown above and make it hyperlinked. |
| Some other articles by Jakob Jelling | Mixing and pouring concrete
Mixing and pouring concrete often sounds easier than it is. This task implies handling the right amount of ingredients and handling them at the right moment and the right way, and all ...
How to repair cracked vinyl siding
Although vinyl siding has many advantages over wood and does not wear as easily, sometimes it can be cracked and might have to be replaced. ...
How to install replacement windows
Replacement windows can be a great choice when needing new windows and wishing to be able to replace them easily. Replacement windows are created and designed in such a way they can fit into an ...
How to install an under-the-sink water filter
Installing a water filter can be very important, especially in those cases where water has more chlorine or minerals than we might wish, ...
How to install a ceiling fan
A ceiling fan can be a great choice for acclimatizing an environment, especially when the space is reduced, but installing it can be difficult and tricky. If you have ...
How to replace a windowsill
Replacing a windowsill can be easier than it seems, you might only need to count with the necessary tools and follow several steps. We will provide you with some useful tips through the next few lines, ...
|
|
| |
|
|
|
